8:1 Clear Urethane Katz-Moses Magnetic Dovetail Jig and 90 Degree Crosscut Guide
**Brand New Stronger 5mmx10mm Neodymium Magnets**
**CNC Dovetail Alignment Boards Now Available in the Store**
Pins
Tails
Shoulders
90 Degree Crosscut Guide
Clear so you can see your lines through the jig
8:1 is typically used for hardwoods
Comes with a KM Tools Sticker
Guides you through all the Dovetail Steps with ease and accuracy, while cutting the learning curve substantially. The Katz-Moses Magnetic Dovetail jig is made in a mold from a virtually indestructible clear polyurethane for years of use. This is the same material used to make pool balls so you know how strong the jig is. It is then laser etched on the top and bottom for clean and easy to read labeling. The magnets have 10 lbs of pulling pressure to hold your saw firm to the jig. It also functions as a 90 degree crosscut guide which is a unique feature to the Katz-Moses Magnetic Dovetail Jig.
Check out these videos where I use it to make all sorts of cool dovetails :
Inlaid Dovetails with David Picciuto: https://www.youtube.com/watch?v=mutzoCJuhyw&t=812s
Cutting Dovetails Tips and Tricks with David Picciuto: https://www.youtube.com/watch?v=i8KPSNcpQjU&t=125s
**Brand New Stronger 5mmx10mm Neodymium Magnets**
**CNC Dovetail Alignment Boards Now Available in the Store**
Pins
Tails
Shoulders
90 Degree Crosscut Guide
Clear so you can see your lines through the jig
8:1 is typically used for hardwoods
Comes with a KM Tools Sticker
Guides you through all the Dovetail Steps with ease and accuracy, while cutting the learning curve substantially. The Katz-Moses Magnetic Dovetail jig is made in a mold from a virtually indestructible clear polyurethane for years of use. This is the same material used to make pool balls so you know how strong the jig is. It is then laser etched on the top and bottom for clean and easy to read labeling. The magnets have 10 lbs of pulling pressure to hold your saw firm to the jig. It also functions as a 90 degree crosscut guide which is a unique feature to the Katz-Moses Magnetic Dovetail Jig.
Check out these videos where I use it to make all sorts of cool dovetails :
Inlaid Dovetails with David Picciuto: https://www.youtube.com/watch?v=mutzoCJuhyw&t=812s
Cutting Dovetails Tips and Tricks with David Picciuto: https://www.youtube.com/watch?v=i8KPSNcpQjU&t=125s
**Brand New Stronger 5mmx10mm Neodymium Magnets**
**CNC Dovetail Alignment Boards Now Available in the Store**
Pins
Tails
Shoulders
90 Degree Crosscut Guide
Clear so you can see your lines through the jig
8:1 is typically used for hardwoods
Comes with a KM Tools Sticker
Guides you through all the Dovetail Steps with ease and accuracy, while cutting the learning curve substantially. The Katz-Moses Magnetic Dovetail jig is made in a mold from a virtually indestructible clear polyurethane for years of use. This is the same material used to make pool balls so you know how strong the jig is. It is then laser etched on the top and bottom for clean and easy to read labeling. The magnets have 10 lbs of pulling pressure to hold your saw firm to the jig. It also functions as a 90 degree crosscut guide which is a unique feature to the Katz-Moses Magnetic Dovetail Jig.
Check out these videos where I use it to make all sorts of cool dovetails :
Inlaid Dovetails with David Picciuto: https://www.youtube.com/watch?v=mutzoCJuhyw&t=812s
Cutting Dovetails Tips and Tricks with David Picciuto: https://www.youtube.com/watch?v=i8KPSNcpQjU&t=125s